Nubira SE Sedan L4-2.0L DOHC D-TEC MFI (2001)
Heater Core: Service and Repair
Auto A/C
Removal Procedure
1. Remove the heater/air distributor case assembly from the vehicle. Refer to "Heater/Air Distributor Case Assembly".
2. Remove the motor lever and actuator rod.
3. Remove the motor screws and the motor to access a buried heater core cover bolt.
4. Remove the foam insulation from the tube base.
5. Remove the remaining actuator rod from the motor lever.
6. Remove the retaining screws that secure the heater core cover to the heater/air distributor case assembly.
7. Slowly separate the lower heater core cover from the rest of the assembly.