Nubira SE Sedan L4-2.0L DOHC D-TEC MFI (2001)
2. Install the gasket to the oil pump and install the oil pump to the engine block with the bolts.
-
Tighten the oil pump bolts to 10 Nm (89 inch lbs.).
3. Install a new oil pump-to-crankshaft seal. Coat the lip of the seal with a thin coat of grease.
4. Coat the threads of the oil pump/pickup tube and support bracket bolts with Loctite (R) 242.
5. Install the oil pump/pickup tube and the bolts.
-
Tighten the oil pump/pick-up tube and support bracket bolts to 10 Nm (89 inch lbs.).
6. Install the oil pan.