Nubira SE Sedan L4-2.0L DOHC D-TEC MFI (2001)
Air Door Actuator / Motor: Service and Repair
Mode Door Motor
Mode Door Motor
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the Aircon cover. Refer to Instrumentation/Driver Information.
3. Disconnect the electrical connector.
4. Remove the motor actuating rod by snapping out it out of the lever with needle-nose pliers.
5. Remove the motor lever.
6. Remove the motor retaining bolts.
7. Remove the mode door motor.
Installation Procedure
1. Install the mode door motor.
2. Install the motor retaining bolts and tighten.
3. Install the motor lever by pressing it onto its shaft.
4. Install the actuating rod.
5. Connect the electrical connector.
6. Install the Aircon cover. Refer to Instrumentation/Driver Information.
7. Connect the negative battery cable.