Nubira SE Sedan L4-2.0L DOHC D-TEC MFI (2001)
Ambient Temperature Sensor / Switch HVAC: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the ambient air temperature sensor electrical connector.
3. Remove the retaining nut from the bracket.
4. Remove the ambient air temperature sensor.
Installation Procedure
1. Position the ambient air temperature sensor into its bracket.
2. Install the retaining nut to the bracket.
Tighten
Tighten the ambient air temperature retaining bracket nut to 6 N.m (53 lb-in).
3. Connect the electrical connector.
4. Connect the negative battery cable.
