daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

A/C High Pressure Line Assembly|Page 2962 > < A/C High Pressure Line Assembly
Page 2
background image

1. Position the high pressure pipe into the vehicle.
2. Install a new O-ring on the pipe at the receiver-dryer.
3. Install the high pressure pipe-to-receiver-dryer connecting block nut.

Tighten
Tighten the high pressure pipe-to-receiver-dryer connecting block nut to 14 N.m (10 lb-ft).

4. Install the the high pressure pipe-to-evaporator flange connecting block nut.

Tighten
Tighten the high pressure pipe-to-evaporator flange connecting block nut to 10 N.m (89 lb-in).

5. Install the bolts which secure the clamps that hold the high pressure pipe to the vehicle.

Tighten
Tighten the clamp bolts to 4 N.m (35 lb-in).

6. Connect the electrical connector to the pressure transducer.
7. Install the air cleaner housing assembly with the retaining bolts.

Tighten
Tighten the air cleaner housing assembly retaining bolts to 10 N.m (89 lb-in).

8. Connect the negative battery cable.
9. Evacuate and recharge the A/C system. Refer to "Discharging, Adding Oil, Evacuating, and Charging Procedures for A/C System".

A/C High Pressure Line Assembly|Page 2962 > < A/C High Pressure Line Assembly