Nubira SE Sedan L4-2.0L DOHC D-TEC MFI (2001)
3. Tighten the power steering gear cylinder pipes at the valve end of the power steering gear.
Tighten the power steering line fittings at the valve end to 18 Nm (13 ft. lbs.).
4. Tighten the power steering gear cylinder pipes at the cylinder end of the power steering gear.
Tighten the power steering line fittings at the cylinder end to 27 Nm (20 ft. lbs.).
5. Lower the vehicle.
Notice: When adding fluid or making a complete change, always use DEXRON-III power steering fluid. Failure to use the proper fluid will cause
hose and seal damage and fluid leaks.
6. Fill the fluid reservoir with power steering fluid.
7. Inspect for leaks. If there are leaks, correct the cause of the leaks and bleed the system.
