Nubira SE Sedan L4-2.0L DOHC D-TEC MFI (2001)
Intake Air Temperature Sensor: Description and Operation
The Intake Air Temperature (IAT) sensor is a thermistor, a resistor which changes value based on the temperature of the air entering the engine. Low
temperature produces a high resistance (4,500 Ohms at 40 °F [-40 °C]), while high temperature causes a low resistance (70 Ohms at 266 °F [130 °C]).
The powertrain control module (PCM)/engine control module (ECM) provides 5 volts to the IAT sensor through a resistor in the PCM/ECM and
measures the change in voltage to determine the IAT. The voltage will be high when the manifold air is cold and low when the air is hot. The PCM/ECM
knows the intake IAT by measuring the voltage.
The IAT sensor is also used to control spark timing when the manifold air is cold.
A failure in the IAT sensor circuit sets a diagnostic trouble code P0112 or P0113.