Nubira SE Sedan L4-2.0L DOHC D-TEC MFI (2001)
2. Install the O2S into the exhaust manifold.
Tighten
Tighten the oxygen sensor sensor to 31 lb-ft (42 N.m).
3. Connect the O2S connector.
4. Connect the negative battery cable.
2. Install the O2S into the exhaust manifold.
Tighten
Tighten the oxygen sensor sensor to 31 lb-ft (42 N.m).
3. Connect the O2S connector.
4. Connect the negative battery cable.