Nubira SE Sedan L4-2.0L DOHC D-TEC MFI (2001)
3. Install the upper B-pillar seat belt anchor with the bolt.
Tighten
Tighten the seat belt anchor bolt to 38 N.m (28 lb-ft).
4. Install the seat belt anchor plastic cap.
5. Install the lower B-pillar trim panel. Refer to Interior Trim.
6. Install the lower B-pillar seat belt anchor with the bolt.
Tighten
Tighten the seat belt anchor bolt to 38 N.m (28 lb-ft).
7. Install the seat belt anchor plastic cap.
