Nubira SE Sedan L4-2.0L DOHC D-TEC MFI (2001)
6. Remove the rear seat cushion. Refer to Seats.
7. Remove the bolt and the floor seat belt anchor.
8. Remove the seat belt.
INSTALLATION PROCEDURE
NOTE: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
1. Install the luggage compartment seat belt retractor with the bolt.
Tighten
Tighten the seat belt retractor bolt to 38 N.m (28 lb-ft).