Nubira SE Sedan L4-2.0L DOHC D-TEC MFI (2001)
1. Install the center seat bolts retractor with the bolt.
Tighten
Tighten the center seat belt retractor bolts to 38 N.m (28 lb-ft).
2. Install the deck lid sill plate cover. Refer to Interior Trim.
3. Install the C-pillar trim. Refer to Interior Trim.
4. Install the seat belt anchors with the bolts.
Tighten
Tighten the seat belt anchor bolts to 38 N.m (28 lb-ft).
5. Install the rear seat cushion. Refer to Seats.