Nubira SE Sedan L4-2.0L DOHC D-TEC MFI (2001)
1. Install the new O-ring seal on the transducer
2. Install the transducer.
Tighten
Tighten the pressure transducer to 7 N.m (62 lb-in).
3. Install the wire connector.
4. Install the air cleaner housing assembly.
4.1 Seat the housing in its place with the pick-up tube in the hole provided.
4.2 Install the air cleaner housing assembly retaining bolts.
Tighten
Tighten the air cleaner housing assembly retaining bolts to 10 N.m (89 lb-in).
4.3 Connect the tube to the intake manifold.
5. Connect the negative battery cable.
6. Evacuate and recharge the A/C system. Refer to "Discharging, Adding Oil, Evacuating, and Charging Procedures for A/C System".