daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

Turn Signal Switch > < Brake Light Switch|Service and Repair
Page 1
background image

Door Switch: Service and Repair

Removal Procedure

1. Disconnect the negative battery cable.
2. Remove the screw and the door jamb switch.
3. Disconnect the electrical connector.

Installation Procedure

1. Connect the electrical connector.

NOTE:  Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature
corrosion.

2. Install the door jamb switch with the screw.

Tighten
Tighten the door jamb switch screw to 4 N.m (35 lb-in).

3. Connect the negative battery cable.

Turn Signal Switch > < Brake Light Switch|Service and Repair