Nubira SE Sedan L4-2.0L DOHC D-TEC MFI (2001)
Front Steering Knuckle: Service and Repair
Disassembly and Reassembly
KNUCKLE
Disassembly Procedure
1. Remove the knuckle assembly from the vehicle.
2. Remove the rotor.
3. Remove the hub and bearing assembly.
4. Remove the brake splash shield.
Assembly Procedure
1. Install the brake splash shield.
2. Install the hub and bearing assembly.
3. Install the rotor.
4. Install the knuckle assembly onto the vehicle.
