Nubira SE Sedan L4-2.0L DOHC D-TEC MFI (2001)
Steering Wheel: Service and Repair
STEERING WHEEL WITH SIR
-
Tools Require
-
KM-210-A Steering Wheel Puller
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the SIR module.
3. Remove the steering wheel nut and the retaining clip.
Important: In order to install the steering wheel correctly, match-mark the steering column shaft to the steering wheel.
4. Remove the steering wheel using the steering wheel puller KM-210-A.
5. Unclip the contact ring from the steering wheel, if necessary.
Installation Procedure
