Nubira SE Sedan L4-2.0L DOHC D-TEC MFI (2001)
1. Reposition the adjusting nut to the marks on the inner tie rod.
2. Install the outer tie rod by twisting it onto the inner tie rod.
3. Connect the outer tie rod to the steering knuckle.
4. Perform a front toe adjustment.
5. Tighten the adjusting nut.
Tighten the outer tie rod adjusting nut to 64 Nm (47 ft. lbs.).
6. Install the outer tie rod nut.
Tighten the outer tie rod nut to 50 Nm (37 ft. lbs.).
7. Install the wheel.