Nubira SE Sedan L4-2.0L DOHC D-TEC MFI (2001)
2. Secure the strut assembly by loosely attaching the strut mount-to-body nuts.
3. Install the knuckle-to-strut assembly nuts and bolts. Do not tighten.
4. Install the clip holding the brake hose to the strut assembly.
Tighten the knuckle-to-strut assembly nuts to 100 Nm (74 ft. lbs.).
5. Connect the stabilizer link to the strut assembly and install the stabilizer link-to-strut assembly nut.
Tighten the stabilizer link-to-strut assembly nut to 47 Nm (35 ft. lbs.).
6. Connect the parking brake.
7. Install the wheel.
