Nubira SE Sedan L4-2.0L DOHC D-TEC MFI (2001)
Shifter A/T: Service and Repair
Removal Procedure
1. Remove the right and the left front lower trim panels, and the floor console.
2. Disconnect the power mode switch connector.
3. Remove the screws securing the shift control lever handle to the shift control lever.
4. Remove the shift control lever handle.
5. Disconnect the selector position indicator lamp connect. Remove the selector position indicator bracket.
6. Remove the bolts securing the detent spring.
7. Remove the nuts from the shift control cable mounting bracket at the front of the shift control assembly.
