Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Wheel Speed Sensor: Service and Repair
Front
Wheel Speed Sensor
Removal Procedure
1. Disconnect the negative battery cable.
2. Raise and suitably support the vehicle.
3. Remove the wheel.
4. Turn the steering wheel to expose the speed sensor. It is located at the rear of the steering knuckle near the tie rod end.
5. Disconnect the front wheel speed sensor electrical connector.
6. Remove the bolt and the front wheel speed sensor from the steering knuckle.
Installation Procedure