Nubira SX Hatchback L4-2.0L DOHC D-TEC MFI (1999)
Air Door Cable: Service and Repair
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the glove box.
3. Slide the cable eyelet off the post on the temperature door lever.
4. Disconnect the cable retainer from the blower housing.
5. Remove the audio system trim plate.
6. Remove the four controller retaining screws.
7. Pull out the controller to provide clearance for removal of the temperature control cable.
8. Disconnect the temperature control cable eyelet from the post on the controller.
9. Snap the cable housing connector out of the slide position on the controller.
Installation Procedure