daewoo Workshop Repair Guides

Daewoo Workshop Service and Repair Manuals

Air Bag System|Page 3634 > < Vacuum Reservoir HVAC|Service and Repair|Page 3628
Page 1
background image

Repairs and Inspections Required After a Collision: Service and Repair
Air Bag System

Repairs and inspections required after an accident

CAUTION: Any repairs to the vehicle's structure must return it to the original production configuration. Deployment requires replacement of

the sensing and diagnostic module (SDM) and the inflator modules, and a dimensional inspection of the steering column.

-

If any supplemental inflatable restraints (SIR) system components are damaged, they must be replaced. If SIR component mounting points are
damaged, they must be repaired or replaced.

-

Never use SIR parts from another vehicle. This does not include remanufactured parts purchased from an authorized source.

-

Do not attempt to service the SDM, the clock spring, or the airbag modules. These items must be replaced if they are defective.

-

Verify the part number of replacement airbag modules. Some inflator modules look identical but contain different internal components.

Accident with or without deployment - Component inspections

Certain inspections must be performed after any crash, whether the airbag has deployed or not:
-

The steering column must be dimensionally inspected.

-

Inspect the knee bolsters and mounting points for distortion, bending, cracking, or other damage.

-

Inspect the instrument panel (I/P) steering column reinforcement plate for distortion, bending, cracking, or other damage.

-

Inspect the I/P braces for for distortion, bending, cracking, or other damage.

-

Inspect seat belts and mounting points. Refer to Seat Belts.

Accidents with deployment - Component replacement and inspections

Certain supplemental inflatable restraints (SIR) components must be replaced or inspected for damage after a frontal crash involving airbag
deployment. Replace the following SIR components:
-

The sensing and diagnostic module (SDM).

-

Inflator modules.

Inspect the clock spring and replace it if necessary. Inspect the wiring and the connector for any signs of scorching, melting, or damage due to
excessive heat.

Air Bag System|Page 3634 > < Vacuum Reservoir HVAC|Service and Repair|Page 3628