Nubira SX Wagon L4-2.0L DOHC D-TEC MFI (1999)
Brake Caliper: Service and Repair
Front
Removal and Installation
Removal Procedure
1. Raise and suitably support the vehicle.
2. To preserve wheel balance, mark the position of the front wheel relative to the wheel hubs. Remove the wheel.
3. Remove the bolt which attaches the brake hose to the caliper. Remove the washers.
4. Plug the openings at the caliper inlet and the brake hose to prevent fluid loss or contamination.
5. Remove the caliper mounting bolts.
6. Remove the caliper.
Installation Procedure
1. Install the caliper.