Nubira SX Wagon L4-2.0L DOHC D-TEC MFI (1999)
Electronic Brake Control Module: Service and Repair
ABS Solenoid Fuse
Removal Procedure
1. Disconnect the negative battery cable.
2. Open the I/P fuse block door on the left-side kick panel.
3. Locate the ABS solenoid fuse in the third cavity up from the bottom, on the right side.
4. Remove the fuse.
Installation Procedure
1. Install a new 10-amp fuse into the socket.
2. Replace the I/P fuse block door on the left-side kick panel.
3. Connect the negative battery cable.