Nubira SX Wagon L4-2.0L DOHC D-TEC MFI (1999)
Steps 1 To 14
Test Description
The number(s) below refer to specific step(s) on the diagnostic table.
1. If the test light is on at both of the fuse terminals, the ignition 1 relay is OK.
5. This step, along with Steps 6, 7, and 8, checks for correct voltage and ground to the ignition 1 relay terminals.
14. After confirming correct voltage and ground to the ignition 1 relay terminals, it can be determined that the ignition 1 relay is faulty.