Charade L3-0993cc 10L (1988) Timing Belt Removal Details
Front Engine Cover
13.
Install the right front engine under cover.
14.
Remove the garage jack.
15.
Installation of alternator drive belt.
Alternator Belt Alignment
(a) Install the alternator drive belt correctly.
Tightening Alternator Belt
(b) Using a T-shaped wrench or the like, apply tension to the drive belt and temporarily tighten the lock bolt on the upper side of the alternator.
Alternator Belt Tension
(c) Adjust the lock bolt in such a way that the deflection at the midpoint between the alternator and the water pump pulley becomes the specified
value when a force of 22 lb. (10 kg) is applied to the midpoint.
Specified Belt Deflection:
5 - 7 mm (0.197 - 0.276 inch) [With a force of 10 kg (22 lb.) applied to point indicated in figure].
16.
Installation of air conditioner belt.
A/C Belt Alignment
