Charade L4-1295cc 1.3L (1989)
8.
Install the attaching bolts of the camshaft timing belt pulley, while preventing the pulley from turning by inserting an iron rod into the hole of the
pulley.
Tightening Torque:
1.5 - 2.2 kg-m (10.8 - 15.9 ft-lb, 14.8 - 21.5 Nm)
NOTE: Be careful not to damage the cylinder head cover gasket surface.
CAUTION: Never allow the camshaft to turn.
Cylinder Head Surface
9.
Wipe off any oil or dirt from the cylinder head cover gasket surface of the cylinder head.
Cover Gasket
10.
Check the cylinder head cover gasket for damage. Replace any gasket which exhibits damage.
NOTE: Install a new gasket in such a way that the identification mark comes at the intake manifold side.
Spark Plug Hole Grommets
