Charade L4-1295cc 1.3L (1989)
Timing Marks
(i) Ensure that the drilled marks of the crankshaft timing belt pulley and camshaft timing belt pulley are aligned with the corresponding indicators.
If the drilled mark is not aligned with the indicator, repeat the operations from the step (a) onward.
21.
Checking of timing belt tension.
When the midpoint of the belt at the tension side is pushed 5.0 mm (0.20 inch), ensure that the pushing force is 0.8 - 1.6 kg (1.77 - 3.52 lb).
Specified Pushing Force:
0.8 - 1.6 kg (1.76 - 3.52 lb, 7.84 - 15.7 N) When belt is deflected 5.0 mm (0.20 inch)
If the belt does not conform to the specification, repeat the operations from the step 20 (d) onward.
Timing Cover Fasteners
22.
Install the timing belt lower cover and upper cover.
Tightening Torque:
0.2 - 0.4 kg-m (1.4 - 2.9 ft-lb, 2.0 - 3.9 Nm)
NOTE: Care must be exercised as to the length of each bolt.
