1500 4x2 Pickup V8-5.2L CNG VIN T (1996)
License Plate Lamp: Description and Operation
Tail Lamps and Rear License Plate Lamp
CIRCUIT OPERATION
Circuit A7 in the Power Distribution Center (PDC) connects to a bus bar in the fuse block. One of the four circuits powered by the bus bar is
circuit F33. Circuit F33 connects to the headlamp switch. Fuse 1 in the PDC protects the A7 circuit. Fuse 18, a 15 Amp, in the fuse block protects
circuit F33.
The headlamp switch has three positions: OFF, PARK (parking lamps) and ON, plus a dimmer switch. When the headlamp switch is in the PARK
or ON position, the switch connects circuit F33 to circuit L7. From the headlamp switch, circuit L7 branches to power the front parking lamps and
rear tail lamps, roof clearance and identification lamps, fender lamps and rear license plate lamps.
