1500 4x2 Pickup V8-5.2L CNG VIN T (1996)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
REMOVAL
1. Remove air cleaner assembly.
2. Disconnect electrical connector from Idle Air Control (IAC) motor.
Fig. 84 Mounting Bolts (Screws) - IAC
3. Remove two mounting bolts (screws).
4. Remove IAC motor from throttle body
INSTALLATION
1. Install IAC motor to throttle body
2. Install and tighten two mounting bolts (screws) to 7 N.m (60 in. lbs.) torque.
3. Install electrical connector.
4. Install air cleaner assembly.