1500 4x2 Pickup V8-5.2L CNG VIN T (1996)
18.
Verify which sway bar bracket to install to frame, check spacing of the holes in the bracket with the holes in the frame. The bracket that has the
wider spacing between holes (P/N 4856574) also has larger diameter holes and uses the 12 mm dia bolts (P/N 6101224) and nuts (P/N 6502697).
The other bracket (P/N 4882025) uses 10 mm dia bolts (P/N 6101717) and nuts (P/N 6502696). Install rear sway bar bracket to frame using 2
bolts and nuts (P/N 6502696) and torque to 40 Nm (30 ft. lbs) (Figure 10).
19.
Install sway bar links (P/N **50238697** 4x2) or (P/N 52038698 4x4) to rear sway bar brackets attached to frame, with stud pointed to outside of
vehicle (Figure 11). Use bolt (P/N 11505098) and nut (P/N 6502697) and torque to 70 Nm (50 ft. lbs).
CAUTION:
THE HEAD OF THE BOLT (P/N 11505098) MUST BE TOWARDS THE FUEL TANK, OTHERWISE THE BOLT MAY RUB AGAINST THE
FUEL TANK.
20.
Remove and dispose of the lower shock bolt and nut on both sides of the vehicle.