1500 4x4 Pickup V8-360 5.9L Magnum (1996)
DaimlerChrysler Corporation
CIMS 482-00-85
800 Chrysler Drive East
Auburn Hills, Michigan 48326-2757
Additional Information
If you have any questions or need assistance in completing this action, please contact your Zone Service Office.
A. Inspect For Blower Motor Relay
NOTE:
Very few vehicles are expected to already be equipped with a blower motor relay.
1.
Inspect the brake pedal support bracket for the presence of a blower motor relay attached to the brake lamp switch bracket (Figure 1) or locate a
blower motor relay that is secured near the brake pedal bracket with a tie strap.
NOTE:
1995 model year vehicles that were built with original equipment foglamps will have two (2) foglamp relays mounted on this bracket.
2.
If a blower motor relay is NOT found, inspect the area near the 84-way bulkhead connector for a WHITE single wire connector with BLACK ends
that connects two PINK with BLACK tracer wires (Figure 2). If the connector and wires are present, follow the wiring harness to locate the blower
motor relay that is secured under the instrument panel.
3.
If a relay was located in either Step 1 or Step 2, verify that this is a blower motor relay as follows:
