dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

All Technical Service Bulletins for Seat Belt Buckle: > < Interior - Seat Belt Cinch Bar Service|Page 6424
Page 1
background image

Seat Belt Buckle: Customer Interest
Seatbelt Buckle - Difficult to Engage with One Hand

NO: 23-09-96

GROUP: Body

DATE: Feb. 2, 1996

SUBJECT: 
Seatbelt Buckle Difficult To Engage With One Hand

MODELS: 
1996 (BR) Ram Truck

NOTE

THIS TSB APPLIES TO ALL CLUB CAB VEHICLES BUILT AT THE ST. LOUIS ASSEMBLY PLANT (WITH A "J" IN THE 11TH
POSITION OF THE V.I.N.) PRIOR TO 10-6-95 (MDH 10-06-XX).

SYMPTOM/CONDITION:

The driver side power seat may have been built with a seat belt buckle that may cause a customer difficulty while trying to latch with one hand.

DIAGNOSIS:

Inspect the driver side power seat belt buckle. If it is P/N 55350128, it should be replaced with P/N 55350129. The part number can be found on the
outside of the buckle just below the statement of conformity to FMVSS 209.

PARTS REQUIRED:

1

5EX67SAZ

Buckle, Power Seat L.H.- AGATE 

1

5EX67SF6

Buckle, Power Seat L.H.- MEDIUM DRIFTWOOD

1

5EX67SP8

Buckle, Power Seat L.H.- BLUE SPRUCE

REPAIR PROCEDURE:

Remove and replace the seat belt buckle by referring to the 1996 Ram Truck Service Manual (Publication Number 81-370-6108) page number 23-42.

POLICY: Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

Labor Operation No: 23-13-01-94 

0.2 Hrs.

FAILURE CODE:

P8 - New Part

All Technical Service Bulletins for Seat Belt Buckle: > < Interior - Seat Belt Cinch Bar Service|Page 6424