1500 4x4 Pickup V8-360 5.9L Magnum (1996)
8.
Remove the PINK with BLACK tracer (A2) wire from cavity 43 of the 84-way bulkhead connector (Figure 14).
9.
Remove the RED wedge from the 7-way ignition switch connector (Figure 15).
10.
Remove the BLACK with ORANGE tracer (A22) wire from cavity 5 of the 7-way ignition switch connector (Figure 15). Then, remove the wire
from the wiring takeout bundle back to the base of the steering column.
11.
Install the supplied blower relay wiring harness so that the X-wrap is located near the base of the steering column (Figure 16). Secure the harness
with a tie strap.
