2500 4x2 Pickup L6-359 5.9L DSL Turbo (1994)
Fuel Cut Solenoid: Adjustments
After replacing the fuel shutdown solenoid, the solenoid shaft length must be checked and (if necessary) adjusted.
1. Turn the ignition switch ON.
Fuel Shutdown Solenoid Lever In UP Position
2. Pull up (by hand) and hold on the solenoid lever. If the solenoid is operating correctly, it should remain in the UP position with the key in the ON
position.
Solenoid Measurement
3. Take a measurement from the bottom of the solenoid mounting bracket to the top of the injection pump shutdown lever pin.
4. Dimension should be 66.9 mm (2.64 inches).
