2500 4x2 Pickup V10-488 8.0L Magnum (1996)
1.
Remove retaining ring, flat washer, and wave washer that secure brake and clutch pedals to push rods (Figure 1).
2.
Remove knee bolster for access to pivot shaft.
3.
Remove brake light switch. Rotate switch clockwise about 300 to release it, then remove switch from bracket.
4.
Remove retainer from passenger side of pedal pivot shaft (Figure 2).
5.
Push pedal pivot shaft toward driver side of support only enough to remove clutch pedal. It is not necessary to remove shaft from pedal support
entirely.
6.
Remove clutch pedal.
