2500 4x2 Pickup V10-488 8.0L Magnum (1996)
4.
Remove engine air inlet duct.
5.
Remove the upper radiator hose from the radiator.
6.
Disconnect and cap the automatic transmission hoses, if equipped.
7.
Remove the radiator to battery strut and body ground wire (Figure 2).
8.
For vehicles equipped with a DOHC engine: Remove the battery and battery tray.
9.
Disconnect the radiator fan module electrical connector(s).
10.
Remove the fan shroud retainers at the top of the shroud (Figure 3).
11.
Lift fan shroud up and out of bottom shroud attachment clips.
NOTE:
For vehicles with the DOHC engine: Remove the left fan first and then remove the right fan.
12.
Remove the lower radiator hose.
13.
Remove the upper radiator isolator bracket mounting screws (Figure 2).
14.
Disconnect the engine block heater wire, if equipped.
