2500 4x2 Pickup V10-488 8.0L Magnum (1996)
Engine Mount: Service and Repair
Front Mount
1. Raise hood, then position fan and related components aside as necessary to obtain necessary clearance.
2. Raise and support vehicle, then attach a suitable lifting device to engine.
3. Raise engine slightly, then remove through-bolts and nuts from brackets and insulators.
4. Remove brackets and insulators as necessary.
5. Reverse procedure to install, noting the following:
a. Install new bracket/cushion-to-block bolts and torque to 60 ft-lbs then torque through-bolt nuts to 50 ft-lbs.
