2500 4x2 Pickup V8-318 5.2L Magnum (1994)
12.
Attach the trailer tow connector to the bracket.
13.
Using a die grinder or suitable tool, grind a drain notch 1/2 inch wide and 1/8 inch deep in the connector housing as shown.
14.
Apply a coating of Silicone Dielectric Grease, P/N J8126688, to the connector terminals.
15.
Connect the battery terminal.
Cherokee (XJ)
1.
Disconnect the negative battery cable.
2.
Remove the trailer tow connector from the bracket on the trailer hitch.
3.
Remove the right side quarter trim panel.
4.
Disconnect the trailer tow harness from the body harness. Remove the harness from the vehicle.
5.
Install the new harness, P/N 56018483, being sure to seat the grommets and attaching pins.
6.
Install the trim panels previously removed.
7.
Attach the trailer tow connector to the bracket.
8.
Using a die grinder or suitable tool, grind a drain notch 1/2 inch wide and 1/8 inch deep in the connector housing as shown above.
9.
Apply a coating of Silicone Dielectric Grease, P/N J8126688, to the connector terminals.
10.
Connect the battery terminal.
Ram Truck (BR)
1.
Disconnect the negative battery cable.
2.
Remove the trailer tow connector from the bracket on the trailer hitch.
3.
Remove the trailer tow harness from the vehicle.
4.
Install the new harness, P/N 56016893.
5.
Attach the trailer tow connector to the bracket.
6.
Using a die grinder or suitable tool, grind a drain notch 1/2 inch wide and 1/8 inch deep in the connector housing as shown above.
7.
Apply a coating of Silicone Dielectric Grease, P/N J8126688, to the connector terminals.
