2500 4x2 Pickup V8-318 5.2L Magnum (1994)
Engine Mount: Service and Repair
Rear Mount
1. Raise and support vehicle, then position transmission jack beneath transmission and remove rear support cushion stud nuts.
2. Raise rear of engine/transmission assembly slightly, then remove bolts securing support cushion to transmission support bracket. Remove cushion
from vehicle.
3. Remove bolts securing transmission support bracket to transmission.
4. Reverse procedure to install, noting the following:
-
Use new transmission support bracket to transmission bolts and torque to 50 ft-lbs. Torque support cushion to transmission support bracket
stud nuts and support cushion to crossmember bolts to 30 ft-lbs.