2500 4x2 Pickup V8-318 5.2L Magnum (1994)
Air Door Actuator / Motor: Service and Repair
Panel/Defrost Door Actuator Replacement
Fig 51 Panel-Defrost Door Actuator
PANEL-DEFROST DOOR ACTUATOR
Removal
1. Remove the heater-A/C housing. Refer to: "Housing Assembly HVAC : Service and Repair" See: Housing Assembly HVAC/Service and
Repair
2. Disconnect the vacuum line from the panel-defrost door actuator.
3. Separate the panel-defrost door crank arm from the door pivot pin.
4. Remove the screws that secure the panel-defrost door actuator to the heater-A/C housing.
5. Remove the panel-defrost door actuator from the heater-A/C housing.
Installation
1. Install the panel-defrost door actuator on the heater-A/C housing.
2. Install and tighten the screws that secure the panel-defrost door actuator to the heater-A/C housing.
3. Press the panel-defrost door crank arm onto the door pivot pin.
4. Connect the vacuum line to the panel-defrost door actuator.
5. Install the heater-A/C housing.