dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Tailgate Latch Handle Escutcheon - Loose|Page 6631 > < Tailgate Latch Handle Escutcheon - Loose|Page 6625
Page 1
background image

Trunk / Liftgate Handle: All Technical Service Bulletins
Tailgate Latch Handle Escutcheon - Loose

NO: 23-71-94

GROUP: Body

DATE: Oct. 7, 1994

SUBJECT:
Tailgate Latch Handle Escutcheon Loose

MODELS:

1995 (BR) Ram Truck

NOTE:

THIS BULLETIN APPLIES TO VEHICLES BUILT FROM MDH 08-30-XX THROUGH MDH 09-08-XX.

SYMPTOM/CONDITION:

The tailgate latch handle escutcheon is loose in the tailgate. The hole in the tailgate was stamped slightly oversized.

DIAGNOSIS:

If the vehicle was built during the suspect period, inspect the tailgate latch handle escutcheon. If loose, perform the repair procedure.

PARTS REQUIRED:

1

4467709

Mopar Bond-All Gel Adhesive

REPAIR PROCEDURE:

This bulletin involves gluing the tailgate latch handle escutcheon to the sheetmetal.

1.

Lift and hold tailgate latch release handle.

2.

Using a trim stick, P/N C4755, pry bottom of escutcheon outward to disengage clips.

3.

Rotate escutcheon upward to disengage clip above release handle.

4.

Lift escutcheon upward from behind release handle.

5.

Separate escutcheon from vehicle (See Illustration).

Tailgate Latch Handle Escutcheon - Loose|Page 6631 > < Tailgate Latch Handle Escutcheon - Loose|Page 6625