2500 4x4 Pickup L6-359 5.9L DSL Turbo (1995)
Fuel Gauge Sending Unit
In-Tank Fuel Filter
The in-tank filter is attached to the bottom of the fuel tank module.
1. Pry the mounting tabs back and remove the in-tank fuel filter.
2. Install new fuel filter into retaining tabs.
FUEL TANK MODULE INSTALLATION
CAUTION: Whenever the fuel tank module is serviced, the locknut and rubber gasket must be replaced.
1. Using a new gasket, position the fuel tank module into the opening in fuel tank. The fuel line connectors, the pressure relief/rollover valve and the
fuel gauge electrical connector should all be pointed to the drivers side of the vehicle before tightening locknut.
2. Position new locknut over top of fuel tank module.
3. Tighten locknut.
4. Install fuel tank.