2500 4x4 Pickup L6-359 5.9L DSL Turbo (1995)
Fuel Line Quick Connect Fitting
3. Push fitting over fuel tube until retainer seats and a click is heard. When the fitting is properly locked retainer ears will be visible in the windows.
4. Verify connection by pulling on the fuel tube. If fitting locks in place connection is secure.
5. Using the DRB II, select the Automatic Shut Down (ASD) Fuel System Test to pressurize fuel system and check for leaks.
CAUTION: Unless the test is stopped or the ignition switch is turned to the OFF position the fuel pump relay and the ASD relay will remain energized
for 7 minutes by the ASD Fuel System Test
Latch Clip Type Fittings
1. Disconnect the negative battery cable.
2. Perform the fuel pressure release procedure.
3. Clean the fitting of any foreign material before disassembly.
4. Pry up on the latch clip with a screwdriver.
5. Slide the latch clip toward the fuel rail while lifting with the screwdriver.
6. Remove the latch clip from the fuel rail.
