2500 4x4 Pickup L6-359 5.9L DSL Turbo (1995)
Fuel Gauge Sending Unit And In-Tank Filter
IN-TANK FUEL STRAINER INSTALLATION
1. Snap the fuel filter onto the mounting tabs of the fuel reservoir.
INSTALLATION
1. Wipe seal area of tank clean, and install a new seal on tank.
NOTE: Locknut and gasket must be replaced, whenever the fuel tank module is serviced.
2. Install new locknut over top of fuel tank module.
3. Push fuel tank module into the tank, being careful not to bend the sending unit float arm, and hold with one hand while tightening the locknut with
the other hand.
4. Install fuel tank assembly.
5. Check for leaks.