2500 4x4 Pickup V8-318 5.2L Magnum (1995)
6.
Remove right hand pivot from tailgate by removing 2 retaining bolts. Retain bolts for reinstallation (Figure 2).
7.
Position new pivot assembly in same location/position as old pivot assembly.
8.
Attach pivot using old bolts and torque to 200 in. lbs. (22 Nm).
9.
Install new bushing onto body side pivot pin. Push bushing until arms are fully seated on pin (See Figure 2).
10.
Install tailgate by placing left hand hinge into left hand pivot. Then insert right hand hinge collar over right hand pivot bushing/pin.
11.
Install tailgate cable strap by pushing onto bolt on box side.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
23-40-64-90..........................................................................................................................................................................0.7 Hrs.
FAILURE CODE:
PS - New Part
