2500 4x4 Pickup V8-318 5.2L Magnum (1995)
Tail Lamp: Description and Operation
Circuit A7 in the Power Distribution Center (PDC) connects to a bus bar in the fuse block. One of the four circuits powered by the bus bar is circuit F33.
Circuit F33 connects to the headlamp switch. Fuse 1 in the PDC protects the A7 circuit. Fuse 18, a 15 amp, in the fuse block protects circuit F33.
The headlamp switch has three positions: OFF, PARK (parking lamps) and ON, plus a dimmer switch. when the headlamp switch is in the PARK or ON
position, the switch connects circuit F33 to circuit L7. From the headlamp switch, circuit L7 branches to power the front parking lamps and rear tail
lamps, roof clearance and identification lamps, fender lamps and rear license plate lamps.
