2500 4x4 Pickup V8-360 5.9L VIN 5 Magnum (1994)
6.
Using the new bracket as a template, center punch the location for the third hole on the grille support brace (Figure 3).
7.
Drill a 3/32" (3.7 mm) hole in the grille support brace (Figure 4).
CAUTION:
Drill hole in rear side of grille support brace only. Do not drill through the front side of grille support brace.
8.
Install the remaining screw into the drilled hole and torque all three screws to 40 in-lbs (4.5 Nm) (Figure 5).
