dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Maintenance Required Lamp/Indicator > < Emissions Maintenance Light|Description and Operation
Page 1
background image

Emissions Maintenance Light: Service and Repair

  

After the recommended maintenance has been performed the mileage counter in the PCM must be reset. Reseting the SRI light without performing
the required maintenance may be in violation of federal law. Only after performing the required maintenance, should the SRI light be reset.

Resetting the SRI light requires the use of the DRBII or equivalent scan tool. SEE COMPUTERIZED ENGINE CONTROLS for reset
procedures.

If the PCM is replaced, the current mileage must be entered into memory of the new controller. For more information SEE Powertrain
Management/Computers and Control Systems/Testing and Inspection/Procedures
.

The manufacturer recommends performing the following procedures at these intervals:

60,000 miles          

82,500 miles

Replace EGR Valve             

Replace Oxygen Sensor

Replace EGR Tube (if equipped)
Clean EGR passage
Replace PCV Valve

Maintenance Required Lamp/Indicator > < Emissions Maintenance Light|Description and Operation