2500 4x4 Pickup V8-360 5.9L VIN 5 Magnum (1994)
Electric EGR Transducer: Service and Repair
EGR, EET Location
REMOVAL
1. Disconnect Electronic EGR Transducer (EET) vacuum supply hose.
2. Disconnect EET electrical connector.
3. Remove EGR valve mounting bolts.
4. Remove EGR valve and EET assembly.
INSTALLATION
1. Clean gasket mating surfaces.
2. Install EGR valve and EET assembly, with new gasket.
3. Install EGR valve mounting bolts and torque to 23 Nm (200 in-lbs).
4. Connect EET vacuum supply hose.
5. Connect EET electrical connector.
