2500 4x4 Pickup V8-360 5.9L VIN 5 Magnum (1994)
5. Remove stub shaft from valve assembly by lightly tapping on a block of wood to loosen shaft. Then disengage stub shaft pin from hole in spool
valve and separate the valve assembly from stub shaft.
6. Remove spool valve from valve body by pulling and rotating the spool valve from the valve body.
7. Remove spool valve O-ring and valve body teflon rings and O-rings underneath the teflon rings.
8. Remove the O-ring between the worm shaft and the stub shaft.
ASSEMBLY
NOTE: Clean and dry all components, then lubricate with power steering fluid.
1. Install spool valve spool O-ring.
2. Install spool valve in valve body by pushing and rotating. Hole in spool valve for stub shaft pin must be accessible from opposite end of valve
body.